85 oc, radial leaded non-polar aluminum electrolytic specifcations capacitance range: voltage range: capacitance tolerance: operating temperature range: dc leakage current: dissipation factor @ 120 hz, +25 oc: load life: shelf life: outline drawing type sn is a non-polar radial leaded aluminum elec - trolytic capacitor with a +85 oc, 1000 hours life rating. the sn is ideal for applications where the polarity is unknown or reversed such as signal coupling circuits and speakers. highlights ? non-polar ? +85 oc ? good for unknown polarity applications ? available in t&r and ammo pack 0.47 to 2200 f 6.3 to 100 wvnp 20% C40 oc to +85 oc after 2 minutes, +20 oc at rated voltage i = .03cv + 4 a max c = capacitance in (f) v = rated voltage i = leakage current in a wv (v) 6.3 10 16 25 35 50 100 df(%) 24 20 17 15 14 12 10 for capacitance values > 1000 f, the df (%) value is increased 2% for every additional 1000 f apply wvnp for 1,000 hours at +85 oc with polarity inverted every 250 hours capacitance change within 20% of initial limit dc leakage current meets initial limits esr 200% of initial value 500 hrs with no voltage applied at +85 oc cap change within 25% from initial limits dc leakage 200% of initial value esr 200% of initial value l s ?0.5 15 min. d 5 pvc sleeve d ?0.05 case vented on diameters 6.3 and greater. vinyl sleeve adds .5 max. to diameter and 2.0 max. to length. dimensions in (millimeters) cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type sn 85 oc non-polar aluminum electrolytic capacitors
part numbering system sn 100 m 100 s t capacitance rated lead type capacitance tolerance voltage packaging confguration (f) (%) (vdc) sn 1r0 = 1 100 = 10 101 = 100 102 = 1000 m = 20 6r3 = 6.3 010 = 10 100 = 100 a = tape & ammo e = different characteristic r = tape & reel s = standard 1 = lead cut 2 = lead form 4 = lead crimp & cut (form) t = standard ratings cap (f) catalog part number max esr 120 hz +25 oc () max ripple 120 hz +85 oc (ma) size in. (mm) diameter (d) length (l) lead space (s) lead dia. (d) 6.3 wvnp (8 vnp surge) 33 sn330m6r3st 9.65 63 .197 (5.0) .433 (11.0) .079 (2.0) .0197 (0.5) 47 sn470m6r3st 6.78 84 .236 (6.0) .433 (11.0) .098 (2.5) .0197 (0.5) 100 sn101m6r3st 3.18 140 .315 (8.0) .453 (11.5) .138 (3.5) .0197 (0.5) 220 sn221m6r3st 1.45 235 .394 (10.0) .472 (12.0) .197 (5.0) .0236 (0.6) 330 sn331m6r3st 0.97 310 .394 (10.0) .630 (16.0) .197 (5.0) .0236 (0.6) 470 1000 2200 sn471m6r3st sn102m6r3st sn222m6r3st 0.68 0.32 0.16 400 690 1250 .394 (10.0) .512 (13.0) .630 (16.0) .787 (20.0) .984 (25.0) 1.26 (32.0) .197 (5.0) .197 (5.0) .295 (7.5) .0236 (0.6) .0236 (0.6) .0315 (0.8) 10 wvnp (13 vnp surge ) 10 sn100m010st 26.54 42 .197 (5.0) .433 (11.0) .079 (2.0) .0197 (0.5) 22 sn220m010st 12.06 57 .197 (5.0) .433 (11.0) .079 (2.0) .0197 (0.5) 33 sn330m010st 8.04 77 .236 (6.0) .433 (11.0) .098 (2.5) .0197 (0.5) 47 sn470m010st 5.65 93 .236 (6.0) .433 (11.0) .098 (2.5) .0197 (0.5) 100 sn101m010st 2.65 193 .315 (8.0) .453 (11.5) .138 (3.5) .0197 (0.5) 220 sn221m010st 1.21 255 .394 (10.0) .630 (16.0) .197 (5.0) .0236 (0.6) 330 sn331m010st 0.80 380 .394 (10.0) .787 (20.0) .197 (5.0) .0236 (0.6) 470 sn471m010st 0.56 470 .512 (13.0) .787 (20.0) .197 (5.0) .0236 (0.6) 1000 sn102m010st 0.27 885 .630 (16.0) .984 (25.0) .295 (7.5) .0315 (0.8) 2200 sn222m010st 0.13 1450 .630 (16.0) 1.42 (36.0) .295 (7.5) .0315 (0.8) 16 wvnp (20 vnp surge) 10 sn100m016st 22.56 42 .236 (6.0) .433 (11.0) .079 (2.0) .0197 (0.5) 22 sn220m016st 10.25 69 .236 (6.0) .433 (11.0) .098 (2.5) .0197 (0.5) 33 sn330m016st 6.84 98 .315 (8.0) .453 (11.5) .138 (3.5) .0197 (0.5) 47 sn470m016st 4.80 115 .315 (8.0) .453 (11.5) .138 (3.5) .0197 (0.5) 100 sn101m016st 2.26 205 .394 (10.0) .630 (16.0) .197 (5.0) .0236 (0.6) 220 sn221m016st 1.03 330 .394 (10.0) .787 (20.0) .197 (5.0) .0236 (0.6) 330 sn331m016st 0.68 445 .512 (13.0) .787 (20.0) .197 (5.0) .0236 (0.6) 470 sn471m016st 0.48 570 .512 (13.0) .984 (25.0) .197 (5.0) .0236 (0.6) 1000 sn102m016st 0.23 1020 .630 (16.0) 1.26 (32.0) .295 (7.5) .0315 (0.8) type sn 85 oc non-polar aluminum electrolytic capacitors cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com
ratings cap (f) catalog part number max esr 120 hz +25 oc () max ripple 120 hz +85 oc (ma) size in. (mm) diameter (d) length (l) lead space (s) lead dia. (d) 25 wvnp (32 vnp surge) 1.0 2.2 4.7 10 22 sn010m025st sn2r2m025st sn4r7m025st sn100m025st sn220m025st 199.04 90.47 42.35 19.90 9.05 17 25 34 50 86 .197 (5.0) .197 (5.0) .197 (5.0) .236 (6.0) .315 (8.0) .433 (11.0) .433 (11.0) .433 (11.0) .433 (11.0) .453 (11.5) .079 (2.0) .079 (2.0) .079 (2.0) .098 (2.5) .138 (3.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) 33 47 100 220 330 470 sn330m025st sn470m025st sn101m025st sn221m025st sn331m025st sn471m025st 6.03 4.23 1.99 0.90 0.60 0.42 105 140 240 390 580 690 .315 (8.0) .394 (10.0) .394 (10.0) .512 (13.0) .630 (16.0) .630 (16.0) .453 (11.5) .472 (12.0) .787 (20.0) .787 (20.0) .984 (25.0) .984 (25.0) .138 (3.5) .197 (5.0) .197 (5.0) .197 (5.0) .295 (7.5) .295 (7.5) .0197 (0.5) .0236 (0.6) .0236 (0.6) .0236 (0.6) .0315 (0.8) .0315 (0.8) 35 wvnp (44 vnp surge) 3.3 4.7 10 22 33 sn3r3m035st sn4r7m035st sn100m035st sn220m035st sn330m035st 56.30 39.53 18.58 8.44 5.63 27 34 54 94 125 .197 (5.0) .197 (5.0) .236 (6.0) .315 (8.0) .394 (10.0) .433 (11.0) .433 (11.0) .433 (11.0) .453 (11.5) .472 (12.0) .079 (2.0) .079 (2.0) .098 (2.5) .138 (3.5) .197 (5.0) .0197 (0.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) .0236 (0.6) 47 100 220 330 470 sn470m035st sn101m035st sn221m035st sn331m035st sn471m035st 3.95 1.86 0.84 0.56 0.40 165 285 520 630 820 .394 (10.0) .512 (13.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .787 (20.0) .984 (25.0) .984 (25.0) 1.26 (32.0) .197 (5.0) .197 (5.0) .197 (5.0) .295 (7.5) .295 (7.5) .0236 (0.6) .0236 (0.6) .0236 (0.6) .0315 (0.8) .0315 (0.8) 50 wvnp (63 vnp surge ) 0.47 1.0 2.2 3.3 4.7 snr47m050st sn010m050st sn2r2m050st sn3r3m050st sn4r7m050st 338.80 159.24 72.38 48.25 33.88 11 17 25 31 41 .197 (5.0) .197 (5.0) .197 (5.0) .236 (6.0) .236 (6.0) .433 (11.0) .433 (11.0) .433 (11.0) .433 (11.0) .433 (11.0) .079 (2.0) .079 (2.0) .079 (2.0) .098 (2.5) .098 (2.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) 10 22 33 47 100 sn100m050st sn220m050st sn330m050st sn470m050st sn101m050st 15.92 7.24 4.83 3.39 1.59 70 115 150 190 310 .315 (8.0) .394 (10.0) .394 (10.0) .394 (10.0) .512 (13.0) .453 (11.5) .472 (12.0) .630 (16.0) .787 (20.0) .787 (20.0) .138 (3.5) .197 (5.0) .197 (5.0) .197 (5.0) .197 (5.0) .0197 (0.5) .0236 (0.6) .0236 (0.6) .0236 (0.6) .0236 (0.6) 220 330 sn221m050st sn331m050st 0.72 0.48 570 790 .630 (16.0) .630 (16.0) .984 (25.0) 1.42 (36.0) .295 (7.5) .295 (7.5) .0315 (0.8) .0315 (0.8) 63 wvnp (79 vnp surge) 1.0 2.2 3.3 4.7 10.0 sn010m063st sn2r2m063st sn3r3m063st sn4r7m063st sn100m063st 159.24 72.38 48.25 33.88 15.92 17 25 37 44 74 .197 (5.0) .197 (5.0) .197 (5.0) .236 (6.0) .315 (8.0) .433 (11.0) .433 (11.0) .433 (11.0) .433 (11.0) .453 (11.5) .079 (2.0) .079 (2.0) .098 (2.5) .098 (2.5) .138 (3.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) 22 33 47 100 220 sn220m063st sn330m063st sn470m063st sn101m063st sn221m063st 7.24 4.83 3.39 1.59 0.72 130 175 230 410 660 .394 (10.0) .394 (10.0) .512 (13.0) .630 (16.0) .630 (16.0) .630 (16.0) .787 (20.0) .787 (20.0) .984 (25.0) 1.26 (32.0) .197 (5.0) .197 (5.0) .197 (5.0) .295 (7.5) .295 (7.5) .0236 (0.6) .0236 (0.6) .0236 (0.6) .0315 (0.8) .0315 (0.8) parts highlighted in yellow are obsolete. cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type sn 85 oc non-polar aluminum electrolytic capacitors
ratings cap (f) catalog part number max esr 120 hz +25 oc () max ripple 120 hz +85 oc (ma) size in. (mm) diameter (d) length (l) lead space (s) lead dia. (d) 100 wvnp (125 vnp surge) 0.47 1.0 2.2 3.3 4.7 snr47m100st sn010m100st sn2r2m100st sn3r3m100st sn4r7m100st 282.33 132.70 60.32 40.21 28.23 14 21 34 49 58 .197 (5.0) .197 (5.0) .236 (6.0) .315 (8.0) .315 (8.0) .433 (11.0) .433 (11.0) .433 (11.0) .453 (11.5) .453 (11.5) .079 (2.0) .098 (2.5) .098 (2.5) .138 (3.5) .138 (3.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) .0197 (0.5) 10.0 22 33 47 100 sn100m100st sn220m100st SN330M100ST sn470m100st sn101m100st 13.27 6.03 4.02 2.82 1.33 100 180 220 285 510 .394 (10.0) .512 (13.0) .512 (13.0) .512 (13.0) .630 (16.0) .472 (12.0) .787 (20.0) .787 (20.0) .984 (25.0) 1.26 (32.0) .197 (5.0) .197 (5.0) .197 (5.0) .197 (5.0) .295 (7.5) .0236 (0.6) .0236 (0.6) .0236 (0.6) .0236 (0.6) .0315 (0.8) parts highlighted in yellow are obsolete. notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information con - tained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guaran - tee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa - tion regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi - cated in such warnings, cautions and notes, or that other safety measures may not be required. type sn 85 oc non-polar aluminum electrolytic capacitors cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com
|
